PLEASE SEE ATTACHED Bartop Arcade Assembly Guide INSTRUCTIONS FOR DIMENSIONS OF THE UNIT ETC
I have set up Easel for two 2400 x 1200mm timber sheets. You will notice that everything is colour coded as presented on Easel, so as you cut, take note of the colours which will help you when assembling.
You will need to make some slight adjustments to the screen hole size in Easel to suit the dimensions of the monitor you will use.
NOTE: Because all monitors are different, you will need to provide your own way of attaching the screen to the front panel. Usually screwing some wood to hold the monitor in place, however if you have access to a 3d printer, you could always print something to hold it.
NOTE: This should already be set up for you in Easel, however, be sure to cut this project with the grooves of both the front panel (monitor panel) and button/joystick panel facing towards you on the M2. This is how the screen sits in and the joystick as well.